Fuji Xerox DocuPrint CM305 df User Manual page 95

• For Windows XP, Windows XP 64-bit Edition, Windows Server 2003, and
Windows Server 2003 x64 Edition
1
Click start (Start for Windows Server 2003 / Windows Server 2003 x64 Edition) → Printers and
Faxes.
2
Click Add a printer (Add Printer for Windows Server 2003 / Windows Server 2003 x64 Edition)
to launch the Add Printer Wizard.
3
Click Next.
4
Select A network printer, or a printer attached to another computer, and then click Next. If
the printer is not listed, enter the path to the printer in the text box.
For example:\\<server host name>\<shared printer name>
The server host name is the name of the server computer that identifies it on the network. The
shared printer name is the name assigned during the server installation process.
5
Click Browse for a printer, and then click Next.
6
Select the printer, and then click Next.
If this is a new printer, you may be prompted to install a print driver. If no system driver is
available, you need to specify the path to available drivers.
7
Select Yes if you want this printer to be set as the default printer, and then click Next.
If you want to verify installation, click Yes to print a test page.
8
Click Finish.
When a test page prints successfully, installation is complete.
Network Basics 94