• Power Saver Wake Up
Purpose:
To specify whether to wake up from the Low Power or Sleep mode when OnHook is set to Off.
Values:
OffHook Wake Up
• Auto Reset
Purpose:
To automatically reset the settings for Copy, Scan, or Fax to the default settings and return to the
standby mode after you do not specify any settings for the specified time.
Values:
*
45sec
1min
2min
3min
4min
• Fault Time-out
Purpose:
To specify the amount of time the printer waits before canceling a job that stops abnormally. The print
job is cancelled if the time-out time is exceeded.
Values:
Off
*
On
60sec
3–300 sec.
• Job Time-out
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is
cancelled if the time-out time is exceeded.
Values:
Off
*
On
30sec
5–300 sec.
*
Off
Does not wake up from the Low Power or Sleep mode when OnHook
is set to Off.
On
Wakes up from the Low Power or Sleep mode when OnHook is set to
Off.
Disables the fault time-out.
*
Sets the amount of time the printer waits before canceling a job that
stops abnormally.
Disables the job time-out.
*
Sets the time the printer waits for data to arrive from the computer.
Using the Operator Panel Menus and Keypad
326