Clearing Paper Jams From the Fuser Unit
IMPORTANT:
•
Ensure nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, dirt, or oil from
your hands on the film of the belt unit may reduce print quality.
•
Protect the drums of the drum cartridge against bright light. If the front cover remains open for more than 3
minutes, print quality may deteriorate.
NOTE:
•
To resolve the error displayed on the LCD panel, you must clear all print media from the print media path.
1
Turn off the printer and wait for 30 minutes.
2
Push the side button to open the front cover.
3
Open the belt unit.
4
Lift the levers at both ends of the fuser unit, and remove the jammed paper. If you are still unable
to remove the paper, go to the next step.
Troubleshooting
386