Margin Left/Right - Fuji Xerox DocuPrint CM305 df User Manual

Margin Left/Right

To specify the left and right margins of the copy.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 162
• "Making Copies From the ADF" on page 164
2
Press the Copy button.
3
Select Margin Left/Right, and then press the
4
Press the or
button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
0.2 inch* (4 mm*)
0.0–2.0 inch (0–50 mm)
5
Press the Start button to begin copying.
187 Copying
button or use the numeric keypad to set the desired value, and then press the
Specify the value in increments of 0.1 inch (1 mm).
button.