Advanced Tab Settings - Xerox DocuPrint 240A User Manual

High Speed Printing
Check this if print speed problems occur due to specific applications. Default is off.
Get Information from Printer
Clicking [Get Information from Printer] when this printer is used as a network printer verifies
the optional accessories installed using the printer port to which the printer is connected,
and reflects this in each item of [Installable Options] in the [Device Settings] tab.
Note
• This function is not available when the printer is used as a local printer. You have to manually set the
required items.
• The rear tray information cannot be obtained. You have to manually set the required items.
Network Address
Display the network address of the printer that is obtained by clicking [Get Information from
Printer].

Advanced Tab Settings

This section describes the settings of [Printer Features] in the [Advanced] tab.
Select the items in [Printer Features] under [Document Options] of the [Advanced] tab and
change the settings in the [Change Setting] box at the bottom of the tab.
Note
• The settings that can be selected vary depending on which options have been installed. Make these
settings after confirming that option settings are complete.
Refer to
• "Device Settings Tab Settings" (P. 27)
Settings
Output Destination
Set the destination for output.
Note
• The items that can be selected vary according to whether the offset catch tray (optional) or rear tray
(optional) has been installed.
2.3 Device Options and Print Settings
29