Output Settings Tab Settings - Xerox DocuPrint 240A User Manual

Output Settings Tab Settings

This section describes the settings in the [Output Settings] tab.
Note
• You can restore defaults by clicking [Restore Default].
Settings
Job Type
Job Type
Specify the print function from among [Normal Print], [Secure Print], [Sample Print], and
[Delayed Print].
[Normal Print]
Select when you do not want to specify [Secure Print], [Sample Print], or [Delayed
Print].
[Secure Print]
[Secure Print] is a function that temporarily stores print jobs in the printer, and then
prints them when print instructions are received from the control panel.
This function is available only when the hard disk (optional) is installed.
[Sample Print]
[Sample Print] is a function that outputs only one copy when multiple copies are
specified.
If there is no problem, the remaining sets are printed.
This function is available only when the hard disk (optional) is installed.
Note
• [Copy Count] must be set to two or more copies, and [Collated Copies] must be selected in the
[Delayed Print]
[Delayed Print] is a function that temporarily stores print jobs in the printer, and then
prints them at the scheduled time.
This function is available only when the hard disk (optional) is installed.
User ID
For secure print or sample print, specify the [User ID] with up to 8 alphanumeric
characters.
32
2 Operation With Windows NT 4.0
[Page Setup] tab when using [Sample Print].