Xerox DocuPrint 240A User Manual page 15

Settings
Image Enhancement
Specify whether to use the [Image Enhancement] function.
Selecting [On] smoothes out boundaries when printing. This reduces jagged edges, thereby
artificially increasing the resolution of the image. When printing an image (bitmap)
composed of coarse halftone dots, smooth color gradation is impossible in certain
situations. In this case, select [Off].
Draft Mode
Specify whether to reduce the amount of toner used when printing drafts.
When you select [On], the overall printed color becomes lighter. This is best for printing
documents when print quality is not necessary.
Print Mode
Specify whether to give priority to the print speed or the image quality.
Job Offset
Specify the method of the job offset function.
To shift the output position for each job, select [Offset Per Job]. To shift the output position
for each copy, select the [Offset Per Set]. If you do not want to shift the output position,
select [None].
[None] (default)
[Offset Per Job]
[Offset Per Set]
Note
• You can set this item only when the offset catch tray (optional) is installed on the printer.
Feed Separators from
Set the destination where the separators are to be fed to when the transparency separator
function is used.
When [Auto] is selected, the tray set on the machine is used as the feed destination.
[None] (default)
[Auto]
[Tray 1]
[Tray 2]
[Tray 3]
[Tray 4]
Print on Separators
Specify whether or not to print the details printed on the transparencies on the separators
as well when the transparency separator function is used.
[Blank Separators] (default)
[Printed Separators]
Collated
Specify whether to collate a multiple-page file per set when they are printed.
15
1.3 Printer Driver Properties