Xerox DocuPrint 240A User Manual page 30

Job Offset
Specify the method of the job offset function.
To shift the output position for each job, select [Offset Per Job]. To shift the output position
for each copy, select the [Offset Per Set]. If you do not want to shift the output position,
select [None].
[None] (default)
[Offset Per Job]
[Offset Per Set]
Note
• You can set this item only when the offset catch tray (optional) is installed on the printer.
Feed Separators from
Set the destination where the separators are to be fed to when the transparency separator
function is used.
When [Auto] is selected, the tray set on the machine is used as the feed destination.
[None] (default)
[Auto]
[Tray 1]
[Tray 2]
[Tray 3]
[Tray 4]
Print on Separators
Specify whether or not to print the details printed on the transparencies on the separators
as well when the transparency separator function is used.
[Blank Separators] (default)
[Printed Separators]
Print Mode
Specify whether to give priority to the print speed or the image quality.
Halftone
Specify the type of the halftone from among [Type - 1 Fine Dots], [Type - 1 Thick Dots] or
[Type 3]. The number of screen lines for Type 1 is automatically set according to the
resolution set in the [Print Mode].
All settings provide 256 levels of halftone.
[Type - 1 Fine Dots] (default)
Select this when you print texts or graphics.
[Type - 1 Thick Dots]
Select this when you print photos or images. This provides higher gradation than [Type - 1
Fine dots].
[Type 3]
When the moire interference pattern occurs in the other halftone settings, selecting this may
resolve this problem.
30
2 Operation With Windows NT 4.0