Table of Contents
Advertisement
3.4
Using the IP Address
Setting Tool
You can set the printer's IP address by using the IP Address Setting Tool. You can easily
connect the printer to a network with a TCP/IP environment easily. This tool searches a
network for a printer that has been assigned an IP address by a server such as a DHCP
server, then sets the printer's IP address. Also, this tool enables you to set a printer that is
connected to a network without a DHCP server by specifying the MAC address.
Procedure
For Windows NT 4.0/Windows 2000/Windows XP/Windows Server 2003, log on as a user of
the administrator group or as the administrator.
1
If a virus-check software has been installed, either uninstall it or switch
it off.
2
Insert the Software Pack CD-ROM into the CD-ROM drive.
The Fuji Xerox Setup Menu appears automatically.
3
Click CD ROM reference to browse the contents. Then open the
IPSetUpTool folder in the NetUtil folder. Double-click IPSetupTool.exe.
The IP Address Setting Tool starts.
4
Set the setting items as following the messages displayed.
For details about how to use the IP Address Setting Tool, see On-line help of the tool.
3
47
Advertisement
Table of Contents
