Automatically Setting The Printer's Ip Address; Dynamic Methods Of Setting The Printer's Ip Address - Xerox Phaser 6360 User Manual

Automatically Setting the Printer's IP Address

If the printer is connected to a small established TCP/IP network without a DHCP server, use
the installer on the Software and Documentation CD-ROM to detect or assign an IP address to
your printer. For further instructions, insert the Software and Documentation CD-ROM into
your computer's CD-ROM drive. After the Xerox Installer launches, follow the prompts for
installation.
Note:
TCP/IP network.

Dynamic Methods of Setting the Printer's IP Address

There are two protocols available for dynamically setting the printer's IP address:
■
■
You can turn on/off both protocols using the control panel, or use CentreWare IS to turn on/off
DHCP.
Note:
Information
button.
Using the Control Panel
To turn on/off either the DHCP or AutoIP protocol:
1.
2.
3.
4.
5.
6.
Using CentreWare IS
To turn on/off the DHCP protocol:
1.
2.
3.
4.
5.
6.
7.
Downloaded From ManualsPrinter.com Manuals
For the automatic installer to function, the printer must be connected to an established
DHCP (enabled by default on all Phaser printers)
AutoIP
You can view the printer's IP address at any time. On the control panel, select
, press the OK button, select
On the control panel, select
Select
Connection Setup
Select , and then press the OK button.
Network Setup
Select , and then press the OK button.
TCP/IP Setup
Select DHCP/BOOTP or AutoIP
Press the OK button to turn the selection
Launch your web browser.
Enter the printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
Select Properties.
Select the Protocols folder on the left navigation panel.
Select TCP/IP.
In the BOOTP/DHCP Settings section, set the BOOTP/DHCP option to On or Off.
Click the Save Changes button.
Phaser® 6360 Color Laser Printer
Printer Identification
, and then press the OK button.
Printer Setup
, and then press the OK button.
.
or .
On Off
2-6
Configuring the Network Address
, and then press the OK