Table of Contents
Advertisement
3.1 Installing the Printer Driver with the Same Settings to Multiple Computers
10
Click Browse and select the drive or folder on which to create the setup
disk. Then click OK.
Example: When the floppy disk drive is selected
If you select the floppy disk drive, insert a floppy disk in the disk drive, then specify.
11
Click OK on the Setup Disk Directory Selection dialog box.
The creation of the setup disk begins.
12
When the installation is completed, the following dialog box will be
displayed. Click OK.
13
Click Exit on the Creating Setup Disk dialog box, then click Exit on the
Fuji Xerox Setup Menu dialog box.
This completes the creation of the setup disk.
3
37
Advertisement
Table of Contents
