Network Utility Software; Ip Address Setting Tool; How To Start The Ip Address Setting Tool - Xerox DocuPrint 240A User Manual

9

Network Utility Software

9.1

IP Address Setting Tool

You can set the printer's IP address by using the IP Address Setting Tool. You can easily
connect the printer to a network with a TCP/IP environment. This tool searches a network
for a printer that has been assigned an IP address by a server such as a DHCP server, then
sets the printer's IP address. Also, this tool enables you to set a printer that is connected to
a network without a DHCP server by specifying the MAC address.
This tool can be used by starting it from the Software Pack CD-ROM.
Refer to
• How to use the IP Address Setting Tool: Online Help for the tool

How to Start the IP Address Setting Tool

The following procedure explains how to start the IP Address Setting Tool.
Note
• For Windows NT 4.0/Windows 2000/Windows XP/Windows Server 2003, log on as a user of the
administrator group or as the administrator.
1. If a virus-check software has been installed, either uninstall it or switch it off.
2. Insert the Software Pack CD-ROM into the CD-ROM drive.
The [Fuji Xerox Setup Menu] dialog box appears automatically.
3. Click [CD ROM reference] to browse the contents. Then open the [IPSetUpTool]
folder in the [NetUtil] folder, and then double-click [IPSetupTool.exe].
4. Set the items according to the on-screen messages.
For details about how to use the IP Address Setting Tool, refer to the Online Help for
the tool.
9.1 IP Address Setting Tool
55