Acura 2007 RL Owner's Manual page 57

Installing a Child Seat with a
Tether
TETHER ANCHORAGE POINTS
COVER
ANCHOR
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
TETHER STRAP
HOOK
ANCHOR
1. After properly securing the child
seat with the lap/shoulder belt
(see page 22 ), pivot the head
restraint down (see page 156
route the tether strap over the
head restraint.
Installing a Child Seat
2. Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
3. Tighten the strap according to the
seat maker's instructions.
) and
51