Acura 2007 RL Owner's Manual page 110

Multi-Information Display
Memory Position Link
When Memory Position Link is set
to ON, the driver's seat, the steering
wheel, and the outside mirror
positions move to the positions
stored in memory. To cause the
memory to activate, open the driver's
door with the remote, or grab the
door handle while carrying the
remote.
To set the seat memory position, see
page 160 . For information on using
the remote, see page .
170
104
While the multi-information display
is in the POSITION SETUP screen
of the CUSTOMIZE GROUP, press
the SEL/RESET button. The screen
changes to the above display.
Press the SEL/RESET button. The
screen changes as shown above.
Select ON or OFF by pressing the
INFO ( / ) button, then press the
SEL/RESET button to enter your
selection.