Acura 2007 RL Owner's Manual page 231

Loading Discs in the Changer
To load multiple discs in one
operation:
1. Press and hold the LOAD button
on the changer unit until you hear
a beep. You will see ''BUSY'' on
the upper display, and the disc
load indicator turns red and starts
blinking.
2. Insert the disc into the disc slot
when the disc load indicator turns
green and ''LOAD'' appears in the
upper display at the same time.
Insert it only halfway; the drive
will pull it in the rest of the way.
You will see ''BUSY'' on the upper
display, and the disc load indicator
turns red again and blinks as the
disc is loaded.
3. When the disc load indicator turns
green and ''LOAD'' appears on the
upper display again, insert the
next disc in the slot.
Do not try to insert a disc until
''LOAD'' appears. You could
damage the audio unit.
4. Repeat steps 1 through 3 until all
six positions are loaded. If you are
not loading all six positions, press
the LOAD button again after the
last disc has loaded.
If you stop loading discs before all
six positions are filled, the system
will wait for 10 seconds, stop the load
operation, and begin playing the last
disc loaded.
To load a single disc:
1. Press and release the LOAD
button on the changer unit. You
will see ''BUSY'' on the upper
display, and the disc load indicator
turns red and starts blinking.
Audio System
2. Insert a disc into the disc slot
when the disc load indicator turns
green, and ''LOAD'' appears on
the upper display at the same time.
Insert the disc only about halfway;
the drive will pull it in the rest of
the way. You will see the disc
number blinking on the upper
display, and the disc load indicator
turns red again and blinks as the
disc is loaded.
Do not try to insert a disc until
''LOAD'' appears. You could
damage the audio unit.
3. You will see ''DISC READ'' on the
upper display, then the system
begins to play the disc.
CONTINUED
225