Acura 2007 RL Owner's Manual page 317

Acura automobile 2007 rl owner’s manual
Hide thumbs Also See for 2007 RL:
Table of Contents

Advertisement

Setting Up the System
The voice of the HFL can be set to
male or female (U.S. models only).
Also, the incoming notification can
be set to a ring tone, a prompt, or no
notification.
To set up the system, do this:
1.
Press and release the Talk button.
After the beep, say ''System.'' The
HFL response is, ''System options
are setup and clear.''
2.
Press and release the Talk button.
After the beep, say ''Setup.'' The
HFL response is ''Would you like
male or female prompts?''
3.
Press and release the Talk button.
After the beep, say ''Male'' or
''Female,'' depending on the
system voice you want. The HFL
response is, ''Male (Female)
prompts have been selected.
Would you like an audible
notification of an incoming call?''
4.
Press and release the Talk button.
If you say ''Yes'' after the beep, the
HFL system response is, ''Would
you like the notification to be a
ring tone or a prompt?'' If you say
''No'' after the beep, the HFL
system returns to its main menu.
Saying ''No'' will result in no ring
tone or prompt playback during an
incoming call. The audio system
will be mute, and a message will
be displayed.
5.
Press and release the Talk button.
After the beep, say ''Ring tone'' or
''Prompt.'' The HFL system
response is ''A ring tone will be
used.'' or ''An incoming call
prompt will be used.''
If you choose ''Ring tone,'' you will
hear a ring tone through the audio
speakers to announce an incoming
call. If you choose ''Prompt,'' you
will hear this message to
announce an incoming call: ''You
have an incoming call.''
HandsFreeLink
6.
The HFL system response
continues ''A security option is
available to lock the hands free
system. Each time the vehicle is
turned on, a password would be
required to use this system. Would
you like this security option turned
on?''
7.
Press and release the Talk button.
If you say ''No'' after the beep, the
HFL system response is, ''Security
will not be used. The system setup
is complete.''
If you say ''Yes,'' you can set your
password. Refer to the setting
procedure in the next column.
TM
311

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents