Acura 2007 RL Owner's Manual page 415

BOLTS
CLIP
1. Use a Phillips-head screwdriver to
remove the two mounting bolts,
and remove the holding clip with a
flat-tipped screwdriver.
2. Carefully push up the side under
cover into the bumper.
BULB
CONNECTOR
Remove the electrical connector
3.
from the bulb by pushing on the
tab and pulling the connector
down.
4. Remove the bulb by turning it one-
quarter turn counterclockwise.
5. Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
6. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
7. Turn on the fog lights to test the
new bulb.
8. Reinstall the two mounting bolts
on the side under cover and
tighten them securely. Put the
holding clip back on the side
under cover and push on the
center until it locks (the center is
flush with the head).
Lights
409