Acura 2007 RL Owner's Manual page 260

Compass System (U.S. model without navigation system)
Interface Dial Feedback
Changing this setting allows you to
control when (and if) the system will
read the current selection you
choose with the interface dial. This
feature can minimize the need to
look at the screen while operating
the dial. The three settings are
explained in the following table. The
factory default setting is AUTO
Setting Feedback Level
On The system always
reads what you select.
Auto The system reads your
(default) selection only while
the vehicle is moving.
No The system does not
read your selection.
254
Second Set up Screen
.
The second setup screen allows you
to change the system's voice
recognition feedback, voice gender,
and clock settings. To select a setup
item, turn the interface knob until it
is highlighted, then push the
interface selector in to select it.
To view the second setup screen, say
''More,'' or move the interface
selector to the right to select MORE.
To go back to the first setup screen,
say ''Backward,'' or move the
interface selector to the left to select
BACK.