1.
Remove the left or right side
engine compartment cover from
the side you are working on by
carefully pulling the cover out (see
page
394
).
NUTS
BATTERY HOLD-DOWN
If you are replacing the bulb on
the driver's side, remove the
battery cover (see page
424
), then
remove the battery hold-down by
removing the two nuts with a 10
mm wrench. Then carefully slide
the battery toward the engine to
access the bulb.
BULB
CONNECTOR
Remove the electrical connector
2.
from the bulb by pushing on the
tab and pulling the connector
down.
3.
Remove the bulb by turning it one-
quarter turn counterclockwise.
CONTINUED
Lights
405