Acura 2007 RL Owner's Manual page 414

Lights
SOCKET
BULB
HOLDING CLIP
3. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket.
408
5. Install the new bulb into the
socket.
6. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
7. Turn on the lights to make sure
the new bulb is working.
8. (Driver's side)
Reinstall the battery and the
battery cover.
(Passenger's side)
Reinstall the windshield washer
reservoir.
9. Reinstall the engine compartment
side cover.
Replacing a Fog Light Bulb
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.