3. Press any key to proceed. The Geoboard menu appears,
showing choices for a square board. By default, the
option is highlighted.
4. Press the E key to select
with a small cursor at the lower-left peg and five commands
along the bottom.
The Geoboard
commands are
mapped to the five
TI
73 graphing keys.
TI-73 Geoboard
. The 5×5 board appears
5×5
DRAW = Draw object
TFRM = Transform
FMAT = Format
MEAS = Measure
OPTN = Options
5×5
Page 7