Texas Instruments TI-73 Manual Book page 47

Message
NoAxis
Not Found
Object
Limit
Object not
found
Point Limit
Replace?
TI-73 Geoboard
Description
You have attempted to define a line of reflection that is not
press E to select it, move to a second point that forms a
horizontal or vertical. Move the cursor to the line's first point,
horizontal or vertical line, and press E.
You have attempted to use
file that does not yet contain a saved board.
The requested operation would exceed Geoboard's maximum
of six objects on a board.
You have pressed E to perform an object operation
moving the cursor to a vertex point and pressing E again.
without first moving the cursor to an object's vertex point. Try
The requested operation would exceed Geoboard's maximum
of 26 total points on a board.
You are saving a board to a name that already contains a
E. To cancel the save, press any other key.
previously saved board. To replace the saved board, press
File Open
to open a Geoboard
Page 47