Texas Instruments TI-73 Manual Book page 22

Deleting an Object
1. Make sure you are not currently creating an object. You
should see the main Geoboard commands (
and so on).
2. Use the cursor keys (, , , and ) to move the cursor
to any vertex on the object that you want to remove.
3. Press the  key. The object is shown with a dotted line,
and the message
Note If you have selected a point that is shared by two or more
objects, the message
necessary to select the object that you want to remove.
4. Press the E key to remove the object, or press any other
key to keep the object. When you delete an object, its labels
may be reassigned to remaining objects.
TI-73 Geoboard
Delete - Are You Sure?
Select Object
DRAW
appears.
appears. Press  as
, ,
TFRM
Page 22