Texas Instruments TI-73 Manual Book page 50

If this does not correct the problem, try a different
cable and restart your computer. If you continue to receive this
error, please contact
Flash Application Did Not Install — Follow the steps below to
restart the installation.
1. If you selected
2. If you disconnected the
TI 73 or the computer, reconnect the cable prior to restarting
the installation.
Within about 20 seconds after the installer is interrupted, an
error message appears on your computer. The installer exits
after you dismiss the error message, and the home screen
appears.
3. Retry the installation procedure.
If you continue to have difficulty, contact Customer Support.
TI-73 Geoboard
Customer Support
during the installation, skip to step 3.
CANCEL
TI GRAPH LINK
TI GRAPH LINK
for assistance.
cable from either the
Page 50