Texas Instruments TI-73 Manual Book page 41

Translating an Object
When you translate an object, you have the option of moving
either the original object or a copy of it. The operation must not
exceed Geoboard's maximum of 26 points or 6 objects.
1. Select
menu appears.
2. Select
prompt.
3. Use the cursor keys (, , , and ) to place the cursor
on one of the object's points.
4. Press the E key. A temporary copy of the object is
displayed with dotted lines.
Note If you have selected a point that is shared by multiple objects,
Geoboard selects the first object that used the point.
5. Use the cursor keys (, , , and ) to reposition the
temporary copy.
TI-73 Geoboard
(press the key). The
TFRM
. The board reappears, with the
Translate
TRANSFORMATION
Translate
Page 41