Texas Instruments TI-73 Manual Book page 17

Creating a Circular Board
key), and then select
1. To exit the board you are viewing, select
this board?
2. Select
saved, the message
Select
-
select a name for the board.
Select
-
3. When the main Geoboard menu appears, press  or  as
necessary to highlight the
selecting the radius and the number of pegs, with the current
settings highlighted.
4. Press  to highlight the Radius options, press  or  to
highlight a radius, and then press the E key.
5. Press  to highlight the Pegs options, press  or  to
highlight the number of pegs, and then press the E key.
6. Select
TI-73 Geoboard
appears.
. If you have made changes that you have not
YES
to save the board. Follow the prompts to
YES
to exit without saving.
NO
. The circular board appears.
GOTO
Main Menu
Save this board?
menu item. Options appear for
CIR
(press the
OPTN
. The Message
appears.
Exit
Page 17