Multi-Station Transmission - Panasonic UF-E1 User Manual

Sending/Receiving Documents via Internet
Multi-station Transmission enables the sender to transmit the same document to multiple stations without
having to load document for every transmission. This can be done simply by storing the document into
memory and selecting the intended stations one at a time. (Max. 50 stations)
(See note1)(See note2)(See note3) (See note4)
NOTE
70
1. To stop the transmission, press [STOP].
2. It is not possible to set E-Mail addresses with fax stations.
3. If the transmission cannot be completed for any reason, the e-mail may be returned
undelivered, otherwise no reply will be printed.
4. You can review the stations you have entered in step 3 before storing your document into
memory by pressing [ ] or [ ]. Press [CLEAR] to clear an entered station shown on the
display, if necessary.

Multi-station Transmission

1
Set the document(s) FACE DOWN on the
ADF and adjust the Document Guides.
2
INTERNET
3
Select required stations by any combination
of the following methods. (See note 2)
Abbreviated Dialling
G
Directory Search Dialling
G
COPY/
ABBR
E. g. :
(When entering a station for Abbreviated
Dialling or Directory Search Dialling, press
[COPY/SET] after each station is entered.)
4
START
The document is stored into memory and
then the apparatus starts to dial the ISP
telephone number.
DOCUMENT SET
ENTER STATION(S)
COPY/
SET SET
PANASONIC
ENTER STATION(S)
* STORING *