Digital Telephone Answering System; Setting The Tam (Before You Leave Home Or Office); Resetting The Tam (After You Have Returned Home Or To The Office) - Panasonic UF-E1 User Manual

Digital Telephone Answering System

Setting the TAM (Before you leave home or office)

1
OUT/
2WAY REC
to turn ON the OUT/2WAY REC lamp.
2
The apparatus plays the OGM.

Resetting the TAM (After you have returned home or to the office)

1
The [OUT/2WAY REC] button will blink when a new ICM is recorded.
2
OUT/
2WAY REC
Your apparatus plays the new ICM(s).
The display shows the recorded time for each ICM.
3
START
to delete ICM.
or
STOP
to return to standby.
(See note1) (See note2) (See note3) (See note4) (See note5)
(See note6)(See note7)
NOTE
48
1. When the apparatus displays "MEMORY FULL 870", please erase ICM.
2. When you want to receive a call while playing the ICM, press [STOP]. The display will show
"PICKUP TELEPHONE". Lift up the handset to talk.
3. To cancel ICM playback midway, press [STOP].
4. If nothing is done while playing an ICM for 5 seconds, the message will be kept in the memory.
You can play back the ICM anytime by following the steps on page 49.
5. The recording time for ICM can be changed. (See pages 81 and 83)
6. If the incoming message is noisy, the recording time might be less than Max. of 15 minutes.
7. If the apparatus can not detect the engaged tone, it might be changed to FAX mode.
PLAYBACK OGM
01 SUN 15:00 05
Current ICM Total ICM
START TO ERASE