MAINTENANCE AND TROUBLESHOOTING
Maintenance
If the receiving party reports that the received documents were black or contained black lines, try to make a
copy on your apparatus to verify. If the copy is black or has black lines, the document scanning area is
probably dirty and must be cleaned.
To clean the scanning area
1
2
2
3
5
86
Cleaning the Document Scanning Area
1
2
6
5
1. Open the Panel Cover until it is secured.
2. Press the tabs on each side of the Feed Roller
inwards and lift it up.
3. Open the white plastic protector and hold it.
4. Wipe the Scanning Area gently with a soft cloth. Be
sure to use a clean cloth as the Scanning Area is
easily scratched.
5. Press the tabs on each side of the Feed Roller and
hold it down until it is secured.
6. Close the Panel Cover.