Installing the Software
ELP Link III software can be used with the following
operating systems:
• Windows 3.1/95
• Windows NT
• Macintosh OS System (from ver.7)
Connecting Needed Cables
Before installing the software, make sure the projector is
properly connected to your computer. See Chapter 1,
"Installation," for instructions about how to install the serial
and mouse cables needed to use the Link III software.
Installing the Software from Windows 3.x
Perform the following steps to set up the software for
Windows 3.1/95.
1. Insert the ELP Link III for Windows 3.1/95 Setup disk
into a diskette drive (A: or B: as appropriate).
2. In the Windows Program Manager, click on the File
menu, then on Run. The Run dialog box appears:
60
Using the ELP Link III Software