Table of Contents
Advertisement
Function Description and Usage
The function list on the left side of the ELP Link III main
dialog box shows the functions available for assignment to an
Effects button. To assign the functions, see page 66.
The table below describes these functions and how to use
them.
Note: To use the Effects buttons, the ELP Link III software must
be running and the computer connected to the projector.
Function
Line
Ellipse
Square
Bar
Description and usage
Draws a straight line on the screen.
Press the Effects key assigned to this effect. Then
press the bottom multi-purpose button once to define
the line start position. Move the cursor using the
remote Pointer button. Then press the bottom multi-
purpose button twice to define the line end position.
Draws an ellipse (oval) on the screen.
Press the Effects key assigned to this effect. Then
press the bottom multi-purpose button once to define
the position of one end of the ellipse. Move the cursor
using the remote Pointer button. Then press the
bottom multi-purpose button twice to define the
position of the other end of the ellipse.
Draws a square on the screen.
Press the Effects key assigned to this effect. Then
press the bottom multi-purpose button once to define
the position of one corner of the square. Move the
cursor using the remote Pointer button. Then press the
bottom multi-purpose button twice to define the
position of the other corner of the square.
Creates a horizontal or vertical bar. You can use this
function to highlight a portion of the screen with a
horizontal or vertical bar.
Press the Effects key assigned to this effect. Move the
bar using the remote pointer button. Press the bottom
multi- purpose button to lock the bar in place.
Function Description and Usage
65
Advertisement
Table of Contents
