Connecting To A Macintosh Powerbook - Epson EMP-7300 Owner's Manual

Connecting to a Macintosh PowerBook

Remember that you can only use a PowerBook model that
have video-out capability. See page 7 for more information.
Before beginning, make sure that the projector and
PowerBook are both turned off.
1. Connect the video cable.
Note: PowerBook configurations vary. See your computer
manual for the location of the ports needed to connect your EMP
-7300 projector.
a. Connect the other end of the computer cable to the
b. Set the DIP switches of the MAC desktop adapter in
c. Connect an adapter (which came with the computer or
20 Installation
MAC
desktop
adapter
Video
cable
adapter
projector's Computer 1 port. The Computer 2 port is
used when connecting a second computer.
accordance with the resolutions you want to use (i.e.
16" mode).
your own) such as a converter for a D-Sub 15 terminal
to the video output port of your PowerBook.
Computer cable