Table of Contents
Advertisement
Using the Remote Control
pointer button
top
multi-purpose
button
When using the remote control, always point it towards the
remote control receivers located at the front and at the back
of the projector.
To be able to use the remote control as a cordless mouse
connect the projector to your computer with the cables came
with the ELP Link III Kit.
To use the remote control, always point it towards the remote
control receivers located at the front of the projector.
You can use the remote control up to 10 metres (33 feet)
from the projector.
Note: The projector may not respond to remote control
commands in these conditions: ambient light is too bright; a
certain type of fluorescent light is present; a strong light source
(such as direct sunlight) shines into the infrared receiver; or
other equipment emitting infrared energy is present (such as a
radiant room heater). Remove these conditions to use the remote
control or control the projector from a computer.
Source
Menu
Effects
3
Blank
Resize
Custom
Freeze
Mute
- Volume +
Power
Remote control
bottom
multi-purpose
button
Controlling the Projector
37
Advertisement
Table of Contents
