Installing The Usb Display Software - Epson EB-1985WU User Manual

Projecting with USB Display
Related Links
• "Projecting with USB Display"

Installing the USB Display Software

The first time you connect the projector to a computer using a USB cable,
you must install the Epson USB Display software. You do not need to
install the software the next time you connect.
a
If you are connected to multiple image sources, you may need to
change the image source to USB Display.
a
Connect a USB cable to the computer's USB port and to the
projector's USB-B port.
a
If you are using Windows 2000 or Windows XP and you see a
message asking if you want to restart your computer, select
No.
b
Do one of the following to install the software:
• Windows 2000: Double-click Computer > EPSON_PJ_UD >
EMP_UDSE.EXE.
• Windows XP: Installation starts automatically.
a
If it is not installed automatically, double-click My Computer >
EPSON_PJ_UD > EMP_UDSE.EXE.
• Windows Vista/Windows 7/Windows 8/Windows 8.1: When the
dialog box is displayed, click Run EMP_UDSE.EXE.
p.53
• OS X: The USB Display Setup folder is displayed in Finder.
Double-click the USB Display Installer icon and follow the on-
screen instructions.
a
If the USB Display Setup folder is not displayed automatically,
double-click EPSON_PJ_UD > USB Display Installer.
c
Follow any on-screen instructions.
After a moment, computer images are projected. Do not disconnect
the USB cable or turn off the power to the projector until the images
are projected.
a
If nothing is projected, do one of the following:
• Windows: Click All Programs > EPSON Projector > Epson
USB Display > Epson USB Display Ver.x.xx.
• OS X: Click the USB Display icon in the Dock.
d
When you finish projection, do one of the following:
• Windows: Disconnect the USB cable. There is no need to use
Safely Remove Hardware.
• OS X: Select Disconnect from the USB Display icon menu on the
menu bar or Dock and disconnect the USB cable.
54