Table of Contents
Advertisement
Safety Instructions
Always follow these safety instructions when setting up and
using the projector:
1. Do not place the projector on an unstable trolley, stand or
table.
2. Do not use the projector near water or sources of heat.
3. Use attachments only as recommended.
4. Use the type of power source indicated on the projector.
If you are not sure of the type of power available, consult
your dealer or local electricity company.
5. Place the projector near a wall outlet where the plug can
be easily unplugged. Placez l'imprimante près d'une prise
de contacte où la fiche peut être débranchée facilement.
6. Insert the projector's three-pin earthed plug into a
properly earthed socket. If you have a two-pin socket,
contact an electrician to replace it. Do not handle the plug
with wet hands.
7. Always take the following precautions when handling the
plug. Failure to do so may result in sparks or fire.
• Ensure the plug is free of dust before inserting it into a
• Ensure that the plug is inserted into the socket securely.
8. Do not overload wall sockets, extension leads or multi-
way plug boards as this may cause fire or electric shock.
9. Do not place the projector where the cord can be stepped
on as this may result in fraying or damage to the lead or
the plug.
10. Unplug the projector from the wall socket before
cleaning. Use a damp cloth for cleaning. Do not use liquid
or aerosol cleaners.
xii
Introduction
socket.
Advertisement
Table of Contents
