Table of Contents
Advertisement
4. The air filter is attached to the inside of the projector. To
clean the filter you are advised to use a small vacuum
cleaner designed for computers and other office
equipment. If you do not have one, use a dry, lint-free
cloth.
If the dirt is difficult to remove or if the filter is torn,
replace it.
An air filter come with replacement lamps.
Contact your EMP dealer or call an EPSON Service
Centre.
Be sure to request part number.
5. Replace the filter cover.
6. Plug the power cable back into the wall socket.
Replacing the Lamp
The projector lamp typically lasts for about 2000 hours of use.
It is time to replace the lamp when:
• The projected image gets darker or starts to deteriorate.
• The projection lamp indicator (orange and red, flashing
alternately) is red.
• The message "LAMP REPLACE" appears on the screen
when the projector lamp comes on.
Contact your local EPSON dealer for a replacement lamp.Use
only replacement lamp part number.
Warning: Let the lamp cool before replacing it.
1. Turn off the projector and unplug the power cable.
2. Turn the projector over so you can access the lamp cover.
84
Maintenance
Advertisement
Table of Contents
