Connecting To A Macintosh Desktop Computer - Epson EMP-7300 Owner's Manual

Connecting to a Macintosh desktop
computer
Before beginning, make sure that the projector and computer
are both turned off.
1. Connect the video cables.
Note: Macintosh computer configurations vary. See your
computer manual for the location of the ports needed to connect
your EMP-7300 projector.
a. Connect either end of the computer cable to the
b. Set the DIP switches of the Mac desktop adapter in
c. Connect either end of the computer cable to the small
d. Disconnect the monitor cable from the computer and
16 Installation
MAC
desktop
adapter
projector's Computer 1 port. The Computer 2 port is
used when connecting a second computer.
accordance with the resolutions you want to use (i.e.
16" mode).
terminal of the desktop adapter.
connect it to the large terminal (D-sub 15 pin) of the
desktop adapter.
Video
cable
adapter
MAC monitor
adapter
Monitor cable
Computer cable