Nortel Alteon OS 42C4911 Application Manual page 99

4. Examine the trunking information on each switch.
>> /info/l2/trunk
Information about each port in each configured trunk group is displayed. Make sure that trunk
groups consist of the expected ports and that each port is in the expected state.
The following restrictions apply:
Any physical switch port can belong to only one trunk group.
Up to six ports can belong to the same trunk group.
Best performance is achieved when all ports in any given trunk group are configured for
the same speed.
Trunking from third-party devices must comply with Cisco
42C4911, January 2007
Alteon OS Application Guide
(View trunking information)
® ®
EtherChannel technology.
Chapter 4: Ports and Trunking 99