Nortel Alteon OS 42C4911 Application Manual page 42

Alteon OS Application Guide
The following example shows how to configure a SNMPv3 user v3trap with authentication
only:
/c/sys/ssnmp/snmpv3/usm 11
/c/sys/ssnmp/snmpv3/access 11
/c/sys/ssnmp/snmpv3/group 11
/c/sys/ssnmp/snmpv3/notify 11
/c/sys/ssnmp/snmpv3/taddr 11
/c/sys/ssnmp/snmpv3/tparam 11
42 Chapter 1: Accessing the Switch
name "v3trap"
auth md5
authpw v3trap
name "v3trap"
level authNoPriv
nview "iso"
uname v3trap
gname v3trap
name v3trap
tag v3trap
name v3trap
addr 47.81.25.66
taglist v3trap
pname v3param
name v3param
uname v3trap
level authNoPriv
(Configure user named "v3trap")
(Define access group to view SNMPv3 traps)
(Assign user to the access group)
(Assign user to the notify table)
(Define an IP address to send traps)
(Specify SNMPv3 traps to send)
(Set the authentication level)
42C4911, January 2007