Nortel Alteon OS 42C4911 Application Manual page 27

Alteon OS Application Guide
The default value is Disabled for both features. If these features are not already enabled,
change the value to Enabled, then Save.
N – In Advanced Configuration > Advanced Setup, enable "Preserve new IP configura-
OTE
tion on all switch resets," to retain the switch's IP interface when you restore factory defaults.
This setting preserves the management port's IP address in the management module's memory,
so you maintain connectivity to the management module after a reset.
You can now start a Telnet session, Browser-Based Interface (Web) session, a Secure Shell ses-
sion, or a secure HTTPS session to the GbE Switch Module.
42C4911, January 2007 Chapter 1: Accessing the Switch 27