Table of Contents
Advertisement
44444
Battery
Perform the following steps to remove the battery:
1. Make sure the power is off.
2. Turn the notebook upside down.
Note: Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to
the exterior of the notebook.
3. Slide the battery lock/unlock latch (A) to the unlock position.
4. Slide the battery release latch (B) to the release position (see
5. Lift the battery upwards; there are three tabs holding the battery in place at the back (see
Fig.
1).
6. Take the battery out of the compartment.
Hard Disk Drive
To remove the hard disk drive, first remove the battery (see
the following steps:
1. Remove the two screws securing the hard disk drive compartment cover.
B
Fig. 1 Removing the battery.
Fig. 2 Removing hard disk drive compartment cover.
Packard Bell EasyNote MT Disassembly Manual
A
Fig.
1).
Battery
on page 4) and then perform
4
Advertisement
Table of Contents
