Packard Bell EasyNote MT Disassembly Manual page 17

1616161616
1. Remove the screws securing the brackets that hold the left and right speaker assembly.
2. Release the white clip securing the audio board cable and disconnect it from the header on
the main board.
3. Remove the two screws securing the memory compartment cover (see
4. Lift the cover upwards from the right. There are three tabs holding the cover in place on the
left. Raise the cover until you can remove it from the casing (see
5. Carefully disconnect the optional TV antenna cable.
Fig. 25 Location of speaker brackets screws.
Fig. 26 Location of audio board cable.
Packard Bell EasyNote MT Disassembly Manual
Fig. 5).
Fig. 5).
16