Table of Contents
Advertisement
2323232323
2. Take out the subwoofer.
TV Antenna (Optional)
To remove the optional TV antenna cable, first remove the main board (see
15), and then perform the following steps:
1. Remove the screw securing the TV antenna connector.
2. Clear the cable and take out the TV antenna.
Touchpad
To remove the touchpad module, first remove the top cover (see
do the following:
1. Carefully release the white clip securing the touchpad flat cable and disconnect the cable
from the header on the top cover.
Fig. 38 Location of TV antenna connector.
Fig. 39 Location touchpad cable and screws.
Packard Bell EasyNote MT Disassembly Manual
Main Board
Top Cover
on page 10), and then
23
on page
Advertisement
Table of Contents
