Table of Contents
Advertisement
KX-TCD961CXB(57~68)
Before Requesting Help
Problem
You cannot program function items such
as the dialing mode.
You cannot store a phone number in
memory.
While programming function items or
storing numbers, the unit starts to ring.
does not function.
The paged handset does not answer.
While using the intercom, two tones
sound.
60
99.12.3
2:22 PM
Page 60
Remedy
Programming is not possible while the unit is in the
talk or intercom mode.
Do not pause for over 60 seconds while
programming.
You cannot store a phone number while the unit is in
the talk or intercom mode.
Do not pause for over 60 seconds while storing.
To answer the call, lift the handset or press
Start again from the beginning after hanging up.
The handset is too far from the base unit.
The handset is engaged in an outside call. Wait until
the in use indicator (
) light goes out.
The handset is not in the same radio area.
The handset is engaged in an outside call.
The handset has been canceled or has not been
registered. Register the handset in the base unit
(p. 48).
A call is being received. To answer, press
twice.
.
Advertisement
Table of Contents
