Table of Contents
Advertisement
KX-TCD961CXB(22~27)
Making Calls
Make sure that the power is ON (p. 13).
1
Press
2
Dial a phone number.
The dialed number is displayed.
i2345678
After a few seconds, the display will start
showing the length of the call.
888800 - 00 - 00
3
To hang up, press
handset on the base unit.
The handset will return to the stand-by
mode.
To dial after confirming the
entered number
1
Enter a phone number.
The entered number is displayed.
If you misdial, press
erased from the right.
To cancel, press
2
Press
After a few seconds, the display will start
showing the length of the call.
3
To hang up, press
handset on the base unit.
The handset will return to the stand-by
mode.
22
99.12.3
2:08 PM
.
or place the
C
. Digits are
firmly.
C
.
or place the
Page 22
If "
" flashes and an alarm tone sounds
after pressing
base unit. Then try again.
You can choose whether to display the length
of the call or phone number in the talk mode
by programming (p. 33).
To select the receiver volume
3 levels (HIGH, MEDIUM, LOW) are available.
The factory preset is MEDIUM.
While talking, press
desired level.
Ex. LOW is selected.
After a few seconds, the display will return to
the length of the call.
OR
In the stand-by mode, proceed as follows.
1
Press
.
Press G or F until " F6 " is displayed,
2
then press
OK
The current level is displayed.
Ex. LOW is selected.
F6
F or G to select the desired
3
Press
level.
4
Press
.
, move closer to the
F or G to select the
.
Advertisement
Table of Contents
