Table of Contents
Advertisement
KX-TCD961CXB(22~27)
Speed Dialer
Storing Phone Numbers in Memory
You can store up to 20 phone numbers in the handset.
Make sure that the power is ON (p. 13) and the unit is in the stand-by mode.
Press G or F until a desired memory
1
station number ( 00 to
You can enter the desired memory station
number after pressing G or F.
00 -
2
Press
3
Enter a phone number, up to 24 digits.
00 - 3334444
If you misdial, press
erased from the right. To erase all digits,
press
C
firmly.
4
Press
A confirmation tone sounds and the
display will return to the stand-by mode.
To store other numbers, repeat steps 1
through 4.
Dialing a Stored Number
1
Press G or F until the desired phone
number is displayed.
You can also enter the desired memory
station number ( 00 to
or F.
To exit the speed dialer memory, press
2
Press
.
The number is automatically dialed.
24
99.12.3
2:08 PM
Page 24
I
) is displayed.
.
C
. Digits are
.
) after pressing G
I
C
If a pause is required for dialing, press
where needed. Pressing
counts as one digit (p. 26).
To cancel during programming, press
then start from step 1.
Memory card
Use the memory card on page 65 as a name or
phone number index for speed dialer.
Cut out the card and attach it in a convenient
place.
To erase a stored number
Press G or F until the desired phone
1
number is displayed.
You can also enter the desired memory
station number ( 00 to
G or F.
2
Press
.
3
Press
.
C
4
Press
.
.
,
I
) after pressing
Advertisement
Table of Contents
