S3C8275X/F8275X/C8278X/F8278X/C8274X/F8274X
IDLE
— Idle Operation
IDLE
Operation:
The IDLE instruction stops the CPU clock while allowing system clock oscillation to continue. Idle
mode can be released by an interrupt request (IRQ) or an external reset operation.
In application programs, a IDLE instruction must be immediately followed by at least three NOP
instructions. This ensures an adeguate time interval for the clock to stabilize before the next
instruction is executed. If three or more NOP instructons are not used after IDLE instruction,
leakage current could be flown because of the floating state in the internal bus.
Flags:
No flags are affected.
Format:
opc
Example:
The instruction
IDLE
NOP
NOP
NOP
Bytes
1
; stops the CPU clock but not the system clock
INSTRUCTION SET
Cycles
Opcode
(Hex)
4
6F
Addr Mode
dst
src
–
–
6-43