Nur für den internen Gebrauch
NO DHCP response
Press any key?
Ping to Gateway failed
Press any key?
Ping to Partner failed
Press any key?
Generic socket error
Press any key?
TC Login Error
Press any key?
Error connecting partner
Press any key?
Unknown Error
Press any key?
Figure 7-5
Faults shown on optiPoint display
Once a fault occurs, press any key on the terminal to open the optiPoint IPadapter administra-
tion menu. You can resolve the fault there by modifying the appropriate settings.
If a parameter is invalid or not set correctly, the following error messages are also displayed for
the configuration setting:
'CFG error Oxnnnn'
Example:
If an invalid Partner_IP address is entered or if the partner IP address is not set, the following
error code appears: '0x1000' (see figure below)
P31003-E8400-A100-3-7620
Service Manual
highest priority
>
>
>
>
>
>
>
lowest priority
Administration via optiPoint 500
IP Adapter
7-23