Siemens optiPoint 500 Service Manual page 75
System-specific telephones, key modules, adapters, accessories, service providers
Hide thumbs
Also See for optiPoint 500:
- Information and important operating procedures (92 pages) ,
- Quick reference manual (40 pages) ,
- Specification (4 pages)
Table of Contents
Advertisement
Nur für den internen Gebrauch
8.
Click "IP address and routing" and enter the following addresses:
IP address and subnet mask of OIP-2, the IP address of the IP partner --> HG1500 V1.0
@
(Xpress
LAN) or optiPoint IPadapter in "peer-to-peer" mode)
Return to
You also have the option of entering additional routing information. If the file server for upload-
ing/downloading, the OIP-2 and the IP partner are located in different subnets and therefore
cannot be addressed via a single subnet mask, this additional IP routing gateway must be en-
tered.
P31003-E8400-A100-3-7620
Service Manual
Changing any of these parameters will require to
subsequently restart the terminal to activate the new values
IP address and routing
DHCP
IP Routing:
Default gateway:
0.0.0.0
Route 1:
0.0.0.0
Gateway 1:
0.0.0.0
Mask 1:
255.0.0.0
Submit
Administrator settings
WARNING -
IP address:
Subnet mask:
IP partner address:
Route 2:
Gateway 2:
Mask 2:
Reset
Home
Administration Via the Web Browser
10.144.233.62
255.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
255.0.0.0
IP Adapter
7-11
Hide quick links:
Advertisement
Table of Contents
