Ip Adapter - Siemens optiPoint 500 Service Manual

7

IP Adapter

An IP adapter provides voice communication via LAN connections.
The optiPoint IP adapter is an external adapter for optiset E terminals, which can be configured
in the following system environment:
Hicom 150 E Office/Hicom Xpress
●
Hicom 150 H
●
HiPath Allserve 150 with HiPath HG1500
●
HiPath 3000
●
Hicom 300 E and Hicom 300 H
●
HiPath 4000
●
IP Adapter Administration
The optiPoint IP adapter can be administered both via the telephone connected to the U
port (basic settings only) and a LAN-based PC (web browser = HTTP client - all settings, e.g.
Upload new firmware, Save configuration files, etc.).
Administration via telephone is essential for initial commissioning if DHCP support (Dynamic
Host Configuration Protocol) is not available. DHCP support is activated by default in the case
of optiPoint IPadapter. If DHCP is supported, the optiPoint IPadapter is automatically recog-
nized in the LAN and can immediately be administered via the web browser.
For information on the administration of the LAN environment at Hicom Xpress
refer to the administration manual for HiPath HG 1500/Hicom Xpress
A31003-K5020-B811-*-7619).
Note:
>
A voice client setting must be configured for Assistant I.
●
The extensions must be set manually as TFA clients for Assistant 300E.
●
P31003-E8400-A100-3-7620
Service Manual
@
LAN
IP Adapter
P0/E
@
LAN, please
@
LAN (reference no.:
7-1